headline: S Series forklift

Lift capacities from 6,000-12,000 lbs


Roller mast assembly
Sellick SEE-THRU© roller 2-stage or 3-stage masts are a stiff mast design with long-lasting wrap-around bracing. Designed with 6 rollers and 4 side-thrust rollers. Integral sideshifting carriage has internal hose reeving. Low maintenance.
Underclearance (std): 12 inches
Mast sideshift: 6 inches
Tilt forward: 45°; tilt rearward: 12°.

Mast mount
High performance maintenance-free mast mount composite bearings with Teflon© coating.
Self-cleaning seals prevent dirt from lodging between mount and shaft.
Large diameter mast mount shaft.

Hydraulic system
Closed hydraulic system powered by cast iron load sense hydraulic pump. Pump built into Perkins Model 1100 engine. Positive-pressure hydraulic tank ensures efficient functioning of pump.
Three psi relief in hydraulic tank ensures positive pressure preventing dirt and other inpurities from entering tank.
Oil cleanliness ensured by suction strainer and 10 micron return filter.

Tank capacity: 21 Gal (79 L)
Hydraulic flow rate: 25 gpm @ 2400 rpm

Cylinders: Low maintenance, piston-type lift cylinders.
All lift cylinders have load check valves to decrease the rate of speed in case of an hose or other hydraulic failure.

Click on the descriptions below to view mast capacity charts (based on 24" load centres).



Sellick manufactures a wide variety of SEE-THRU© masts—shown above are the most popular mast models only. Please contact us for more information including extended load centre capacities.

Sellick Equipment Limited • 519-738-2255 • sellick@mnsi.net