Sellick offers complete mounting packages

Sellick’s standard pad mount transports the TMF-55 on the end of the trailer bed to maximize trailer load surface. It has been designed to fit most trucks and trailer beds.

The TMF-55 is easy to load onto and unload from this mounting system. During transport, the lift truck is safely secured using heavy duty ratchet binders and uses the forklift’s own lighting.

To install this pad mount some minimum clearance requirements must be met. Click here (PDF format) for more information.

Any trailer over 10,000 lb GVWR manufactured after January 26, 1998 must be equipped with a certified under-ride protection bumper. This includes trailers that carry truck mounted forklifts, while the lift truck is not mounted. Sellick offers an under-ride protection bumper specially-designed for truck mounted forklifts.

The folding bumper arms extend to the outside of the trailer and are pinned in place while the lift truck is not loaded on the mount. When the TMF-55 needs to be loaded onto the pad mount, the bumper arms are folded back and securely pinned in place.

The bumper can be used on 96" or 102" wide trailers and may be mounted to I-beam frames with 38" or 44" spacing. This under-ride protection bumper is ideally suited to be used with our standard pad mount.

To ensure the TMF-55 can be properly mounted to your existing truck or trailer or to a new one, Sellick Equipment Limited can assist in vehicle load distribution calculations. Click here to view weight distribution data sheets.